Which Turnoverball Hitch For Flatbed Ford F-350

Question

Question:

I have a companion fifth wheel hitch Will the flip over hitch work on my f350 flat bed?

asked by: Terry H

1

Helpful Expert Reply:

I have a solution for you, but there is actually a Turnoverball system that is designed specifically for flat bed trucks, so the # BWGNRC959 isn't what you're looking for. Instead you'll want to use the # BWGNRK1500, which is designed specifically for flat bed trucks.

expert reply by: Erik B

1

Answer 1

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 2

The most similar gooseneck plate that the Curt rail kit part #C61301 that you referenced is designed to fit is the Curt Gooseneck Plate part #C65500. The part number #C61100 would not fit this rail kit.

view full answer...

Answer 3

I spoke with my contact at Curt and sent him everything you sent me including the pictures and here is what he responded with: Typically we recommend our universal over-bed installation kit, part #C61502, compatible for the over-bed folding &…

view full answer...

Answer 4

Hey Waydin, the Center Section for B&W Turnoverball Underbed Gooseneck Hitch #BWGNRC800 measures 7 1/2" wide, 29 1/2" long, and 4 1/2" high.

view full answer...

Answer 5

Thanks for reaching out! In order to replace the bearings and seal for your 12K hub assembly you'll need to piece the following parts together as we currently (December 2022) don't have a whole bearing kit that includes all of the parts…

view full answer...

Answer 6

The total weight of the B & W #BWRVK3370 Companion is a just over 250 lbs. The hitch breaks down into two sections, the base and the head unit which makes it a bit easier for two folks to move it around. If you have a hoist available, a lifting…

view full answer...

Answer 7

A trailer component as specific as a wheel bearing will not be indicated in a trailer's VIN. The information provided by the VIN is more general and you can refer to the linked photo for an example. You may be able to get this from EZ-Loader with…

view full answer...

Answer 8

In the USA a tandem axle utility trailer with a gross vehicle weight rating (GVWR) of 7500-lbs should have brakes installed. Any trailer over 3000-lbs must have brakes on all wheels in most states, but laws do vary. Some states require braked axles…

view full answer...

Which Turnoverball Hitch For Flatbed Ford F-350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching