Frame Bracket Height Range of Trailer Valet RVR3 part # TVRVR3

Question

Question:

Using the bracket mount, what is the lowest height of the trailer frame this will go? I need to my hitch to 16.5” to clear the door.

asked by: Gary

1

Helpful Expert Reply:

I checked with Trailer Valet and the height range of the frame bracket of the Trailer Valet RVR3 part # TVRVR3 is between 13.5 inches and 20 inches.

expert reply by: Jameson C

1

Answer 1

I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.

view full answer...

Answer 2

Yes, there is Jamie! The Third Wheel Adapter for Parkit360 Force Electric Trailer Dollies item #PA93VR is exactly what you need to make it easier to maneuver your dolly around. It works with the Parkit360 Force 10,000 lbs item #PA46VR or 5,000 lbs…

view full answer...

Answer 3

That's a really good question, Dan! For this type of set up you would need to attach the Parkit360 Transformer, part #PA66VR, stabilizer bars to the kingpin box instead. I've gone ahead and included attachments that show step by step how to…

view full answer...

Answer 4

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3-BB225 has a 3,500 lb weight capacity which is great for most single axle and some tandem axle travel and utility trailers. The valet is not compatible with any trailers larger such…

view full answer...

Answer 5

Hello Tareq, Great question! The Parkit360 Carrier Electric Trailer Dolly - Wireless Controller - 13,000 lbs #PA76VR is designed to work with trailers that have a standard coupler, so it would not be compatible with a 5th wheel, there is not an…

view full answer...

Answer 6

Hey Chris, congrats on the new trailer! I've got two trailer dolly options that are going to work great with your 8,800 lbs 2026 Airstream Classic 28. One is a manual and the other is electric. Manual - Trailer Valet XL Trailer Dolly with Chain…

view full answer...

Answer 7

Junic, I did some research it looks like the 770 monitor will work with all other TPMS's as long as they have a date code of 4519 (45th week of 2019) or newer. If your sensors are older, then you'd need to use the 507 display; #TST-507-D-C.

view full answer...

Frame Bracket Height Range of Trailer Valet RVR3 part # TVRVR3

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching