Best Replacement for Titan Surge-O-Matic 10K Disc Brake Actuator

Question

Question:

I need a Titan Surge-O-Matic 10,000 lb gross 800lb toung for disk brakes

asked by: Michael R

1

Helpful Expert Reply:

The best replacement option we have for a Titan Surge-O-Matic is the Titan Zinc-Plated Brake Actuator part # T4750600 which is rated for disc brakes and can support up to 12,500 lbs. It also has the same drop coupler design as the one you have now so it should be a direct swap.

expert reply by: Conner L

1

click to enlarge

Answer 1

Hello Sophie, we sure do! For your Dexter DX12.5 actuator you can use the following reverse lockout solenoid: - Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts #T4748800

view full answer...

Answer 2

It should, Gene. The DeeMaxx Hydraulic Brake Line Kit #DE37SR is designed for triple axle trailers, and will work great with with disc and drum brakes. You're just going to need to make sure the fitting sizes are the right size. This kit uses…

view full answer...

Answer 3

That's a good question and in order to reverse with the Titan Zinc-Plated Brake Actuator w/ Drop - Disc - 2-5/16" Ball - Bolt On - 12,500 lbs #T4750600 you will need to add a reverse lockout, which is the Solenoid Valve for Titan Brake…

view full answer...

Answer 4

Hey Andy, The closest direct replacement we have for your Titan is the Dexter #T4750600. This has the same drop head as your titan and uses the same bolt pattern to install. I looked up your Titan 10 and the Dexter is rated for a higher weight…

view full answer...

Answer 5

Hydraulic systems are preferred on boat trailers because water and electricity do not mix well. The hydraulic surge brake system is self contained on the trailer and the only connection to the vehicle is the reverse lockout switch that is powered…

view full answer...

Answer 6

I recommend the Dexter Zinc-Plated Model 10 Brake Actuator w/ Drop to replace your current Tie Down actuator. You will need either the Disc Brake Actuator #T4750620 or Drum Brake Actuator #T2478100. These both have a similar design as your current…

view full answer...

Answer 7

In order to find out what you need for a replacement actuator you will want to start by finding out what kind of brakes you have. A different brake actuator is needed if you have drum brakes or disc brakes. You will also want to choose a replacement…

view full answer...

Answer 8

The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout #T4750620. My contact at Titan confirmed this.

view full answer...

Answer 9

We do have a large selection of replacement parts available for your Titan Model 10 Actuator. I am not sure exactly what you are needing so I will list out the replacement parts for you to check out. Replacement Master Cylinder Assembly - #T2374600…

view full answer...

Answer 10

We've checked the part number you gave us before and the replacement for it is the part #T4750820 which is for disc brakes. This one does come with a reverse lock out solenoid. If it has rust all over it I'd consider just replacing the entire…

view full answer...

Best Replacement for Titan Surge-O-Matic 10K Disc Brake Actuator

Product Page this Question was Asked From

Continue Researching