Replacement Hubs for Oddball Axle or Axle Replacement for Boat Trailer
Updated 06/30/2020 | Published 06/26/2020 >
Products Featured in This Question
Question:
I seem to have an oddball axle under my boat trailer. I found some bearings, but am unsure about the hubs. The bearings are on a tapered axle 3/4 to 1-1/4...bearing #s LM67048 and LM11949. Do you have or know of hubs that would match up to this? If it helps the trailer is a 1983 Shorelandr with vin 1yr114070dn000510
asked by: Jason
Expert Reply:
The Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural # AH15450ECOMP is the only fit we have for those bearings. It has an odd bolt pattern of 4 on 5 inch. This likely isn't what you are seeking for your boat trailer.
If you can give me some more information on your trailer I can help with a replacement. For a standard trailer axle, I need to know your spring seat to spring seat measurement, bolt pattern of your hubs, and measurement from hub face to hub face.
If your measurements are not standard, then you may need to replace your axle with the Timbren Axle-Less Trailer Suspension System like # A12RS440 for example which will use a 2 inch square tube not included between the assemblies and has integrated suspension.
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- LM67048 / LM11949
- Standard Grade
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Is There a Trailer Hub Assembly with 3/4" and 1-1/4" Bearings
- Q&A: Trailer Hub that has Bearing Numbers LM67048 and L68149
- Q&A: Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern



