Replacement Parts for Bulldog 12,000 lb Trailer Jack

Question

Question:

I cannot find the older style inner tube to fit 4 inch 12000 lb trailer jack. replacement 12,000 # inner tube for older Bulldog 12 ?

asked by: Jerry L

0

Expert Reply:

For the Bulldog 12K jack you will need to replace the entire jack with # BD182701 if the inner tube is damaged. The other option if it is not damaged is simply to replace the screw and nut # BD500217 which will replace the inner working of that inner leg.

expert reply by: Jason S

0

Answer 1

Unlike costlier brands of trailer jack the entry-level Pro Series line is not supported with the same repair/replacement parts availability as with the upper tier sister brands like Bulldog and Fulton. The few parts we have available to us are shown…

view full answer...

Answer 2

It sounds like you have a spring return Bulldog landing gear jack that has a broken spring and now won't retract when you activate the release lever. I spoke to my contact at Bulldog and he said the springs aren't repairable so you would need…

view full answer...

Answer 3

I have attached a photo that has been expanded so you can see what the part #BD500217 jack screw and nut look like. I have also included a photo with the kit that has the dimensions noted you can check out.

view full answer...

Answer 4

It doesn't sound like you have a 12K Bulldog Trailer Jack as they all used a 1-1/4" diameter threaded rod both pre-2003 and post-2003. Please keep in mind that the rod is measured by the threaded portion. If you can confirm the threaded rod…

view full answer...

Answer 5

I would have no way of identifying the jack you have based on the description given unfortunately but even if we were able to identify it which is a chore in itself sometimes it's not likely you'll be able to find replacement parts that fit.…

view full answer...

Answer 6

The screw and nut assembly, #BD500250, fits Bulldog jacks rated at 10,000 lb lift and 12,000 lb support. We also have kit, #BD500217, which is designed to fit Bulldog series 182 jacks from 2003 to present with a 12,000 lb capacity. I have included a…

view full answer...

Answer 7

The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your exact…

view full answer...

Answer 8

Hello Craig. We do offer the #BD500212 gear kit, but sadly the 001015 bearing is no longer available. We sold our last one about a year ago and we will not be getting more stock.

view full answer...

Answer 9

The Replacement Screw and Nut Kit for 12000-lb Capacity Bulldog Jacks #BD500217 you were looking at is confirmed to work with your older Bulldog 12000lb 180 Series Jack on your gooseneck trailer and will replace the stripped nut currently in your…

view full answer...

Answer 10

The crank for the Bulldog Square Jack #BD182815 is sold separately. You would want a Replacement Bulldog Sidewind Jack Crank Assembly w/ Horizontal Clevis #BD800090 if you would like a horizontal clevis or a Replacement Bulldog Sidewind Jack Crank…

view full answer...

Answer 11

I have a replacement jack option for you, I reached out to my contact at Fulton and the Fulton Magnum Series 12000lb got discontinued a few years back, and all of the rebuild kits and replacement parts were discontinued with it. The only option is…

view full answer...

Answer 12

We may be able to help you find the replacement parts you need for your 12K-rated Fulton jack but a part number for the jack and a photo would help. I did check all 12K-rated jacks and landing gear that we carry and none is the Fulton brand. I did…

view full answer...

Replacement Parts for Bulldog 12,000 lb Trailer Jack

Featured Help Information

Miscellaneous Media

Continue Researching