When Is The Furrion Vision S Camera System Active and How Is It Powered

Updated 06/20/2020 | Published 06/19/2020

Question:

I have a Furrion Vision 4.3 Vision S Camera System, Dose it show the rear of my trailer in just reverse or does it also suppose to show the rear while driving down the road id drive? Thank you.

asked by: Robert L

Helpful Expert Reply:

The feed that the camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF shows on your monitor just depends on how it is wired to power on.

If you wire the camera to receive power via the reverse light circuit, the camera will only be active when the tow vehicle is put in reverse. Conversely, if you were to use the power on the running light circuit the camera would be active whenever the lights were turned on and you would be able to see what's behind you while driving.

The system can be wired in either manner, so it's really just down to how you want it to function. If it was wired at the factory or before you purchased the trailer, odds are it is wired to the reverse light circuit. You could switch the way it is wired to function however you like.

expert reply by: Erik B