Parts Needed To Install Redarc Tow-Pro Elite Trailer Brake Controller On 2020 Kia Telluride

Question

Question:

Hi. I need to get a brake controller for a Kia Telluride which has a factory tow kit. So if I get the Redarc Pro Elite I think I also need th 7 to 4 wiring kit ETBCand? Also, is this pretty straight forward install or do you recommend a shop in the Boston area to install? Thanks.

asked by: Carter K

0

Expert Reply:

The Universal Installation Kit for Trailer Brake Controller part # ETBC7 is indeed what you need to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2020 Kia Telluride. That said, it will require splicing into the vehicle so professional installation is recommend, an RV service center would be best but we don't have specific recommendations.

If you are looking for an easier to install option you can do yourself, I recommend the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part # ETBC7L with the Curt Echo Wireless Trailer Brake Controller part # C51180 since it's wireless.

expert reply by: Conner L

0

Answer 1

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...

Answer 2

I have linked our technical bulletin below you can reference which will help explain the installation of the Redarc Tow-Pro Elite Brake Controller #RED44FR on your 2014 Porsche Cayenne. The issue without the additional components(relay) is the brake…

view full answer...

Answer 3

The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…

view full answer...

Answer 4

We have some great options for you but first we will need to provide the additional wiring necessary for the brake controller, we need to have the 7 pin arrangement. As you already have the 4 pin installed, you will simply need to convert it to a…

view full answer...

Answer 5

Hi Frederick; the cold side of the stoplight switch will be a green wire with a black stripe on your 2024 Kia Telluride LX. Based on the installations we have done it is tucked way up underneath the dash. I went ahead and attached an installation…

view full answer...

Answer 6

Thanks for the pictures! I have exactly what you are looking for. We have a couple of mounting options for the control knob that can go inside inserts in your Subaru's dash. This will give you a clean factory look install. The Universal Mounting…

view full answer...

Answer 7

The Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers #RED69FR only needs to be purchased separately for the #RED24FR. You will, however, still use this wiring harness for installation. The Redarc Tow-Pro Elite Trailer Brake…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

Answer 10

Yes we can definitely set up your 2024 Hyundai Palisade with an electric trailer brake controller. Since there is no trailer wiring currently, you will need both the Curt T-Connector #C43FV and the Universal Install Kit #ETBC7. These two wiring kits…

view full answer...

Answer 11

The easiest location to mount your Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional #RED44FR in your 2022 Chevy Silverado 1500 is going to be just below/next to the ignition, as pictured below. This panel…

view full answer...

Answer 12

I'm more than happy to help! The standard towing parts include a trailer hitch, wiring, and a ball mount. The parts I recommend for your 2023 Hyundai Palisade include the following: etrailer Trailer Hitch - #e95ZR Curt Wiring Harness - #C59236…

view full answer...

Parts Needed To Install Redarc Tow-Pro Elite Trailer Brake Controller On 2020 Kia Telluride

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching