Replacement For Older Reese SC Weight Distribution System

Updated 05/22/2020 | Published 05/20/2020

Products Featured in This Question

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2634)

$23.11

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3931)

$20.94

Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW

(239)

$666.61

Question:

I need a replacement Outer Link Plate for a Reese WD hitch. The link I need to replace is 14 long and 2 wide. It has 9 holes in the bottom portion and a single hole at the other end. Do you have it and what is the part number? I also need the 58512 replacement pads. bc

asked by: Bruce C

Expert Reply:

We do still carry the replacement brake pads for the Reese SC as part # 58512, however Reese no longer offers the outer link plates or any other replacement parts for the Reese SC system as it was discontinued in 2018. Other than the brake pads, any other replacement parts they once offered are long gone.

If you need to replace your current system, Reese replaced it with the Steadi-Flex, available for 5 different trailer tongue weight ranges.

-For fully loaded trailer tongue weights from 250-400 lbs, use # 66557
-For 400-600 lbs, use # RP66558
-For 500-1200 lbs, use # RP66559
-For 600-1200 lbs, use # RP66560
-For 700-1400 lbs, use # RP66561

The hitch ball is sold separately as # 19286 for a 2-5/16 ball or # A-90 for a 2 inch ball.