RV Bumper Sewer Storage System

Question

Question:

Hi. Im looking for a travel trailer bumper mount storage box for storing sewer fittings. Do yall have anything? Thank you

asked by: Brian S

0

Expert Reply:

We have the Valterra RV Sewer hose carrier part # A04-5094BK which is exactly what you are looking for. I attached a review video for more info as well.

expert reply by: Jameson C

0

Answer 1

I can absolutely help you out, but in order to find out exactly which steps Winnebago intended for your Micro Minnie 2306BHS to use, you'll want to measure the distance inside of your door frame and from the floor of the camper to the ground.…

view full answer...

Answer 2

Hi Jeremy! B&W does indeed have an option for your 2001 Ford F250. The B&W Patriot 5th Wheel Trailer Hitch w/ Slider and Universal Install Kit - Dual Jaw - 18,000 lbs #BW38XR is a sliding hitch, which is recommended for short bed trucks, and…

view full answer...

Answer 3

Hey Roger, a set of chains on all 4 of your tires like the Konig part #TH01571255 is going to give you the best traction for your Sprinter. I really like these Konigs because of how well they improve traction, how easy they are to install, and how…

view full answer...

Answer 4

Hey Tom, if you're not entirely married to the B&W the Pullrite SuperGlide 5th Wheel Hitch for Ford Super Duty Factory Prep Package #PUL73RR is just as good and can get to you before the end of the month. This hitch also has a 20k capacity,…

view full answer...

Answer 5

I was able to go out to our warehouse and compare the RhinoFLEX RV Sewer Hose #CAM39761 that you have with the Valterra RV Sewer Hose Carrier #A04-5094BK that you referenced and found that they are compatible with each other. The hose carrier has an…

view full answer...

Answer 6

Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…

view full answer...

Answer 7

Thanks for the picture of your trailer's coupler, from that I can tell you have an underslung coupler which his what the AMP Lock Coupler lock part #AMP56FR is designed to fit. It also works with the flange width you mentioned as well. This is a…

view full answer...

Answer 8

Using the Stromberg Carlson Bike Bunk, #CC-275 for a spare tire carrier, but instead of attaching a bike rack to the 2" receiver you use the etrailer Hitch Mounted Spare Tire Carrier for 2" hitches, #e98ZR is a viable option. It sounds as…

view full answer...

Answer 9

What's great about the Valterra RV Sewer Hose Carrier #A04-5094BK is that you can mount it in other places aside from just at the rear under the bumper. I attached a couple pictures that show it installed in a few other places that might give you…

view full answer...

Answer 10

The outside width of the Lippert RV Spare Tire Carrier part #LC159041 measured where the mounting flanges are is 21-1/8 inches.

view full answer...

Answer 11

The Valterra RV Sewer Hose Carrier part #A04-5094BK could be used without the center support bracket. However, the bracket can actually be placed where you choose so it does not have to be in the direct center. This may then allow you to use the…

view full answer...

RV Bumper Sewer Storage System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching