Recommended Timbren Axle-less Trailer Suspension For Home Built Trailer With Off-Road Tires
Updated 04/17/2020 | Published 04/16/2020
Products Featured in This Question
Question:
Im designing a trailer and plan to use 15-16 wheels and off-road tires. Is this the correct item for a 4 lift with 5-bolt hubs with brakes? Item # A35RS545E
asked by: Steve
Expert Reply:
You're off to a good start with the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs part # A35RS545E. It does include electric brake drums with a 5 on 4-1/2 bolt pattern. However, this is not your best option for off-road tires and it does not include a lift like you mention.
I recommend to use Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange part # ASR1THDS03 which is designed for off-road tires. The spindles have a 4" Lift for greater ground clearance when off-roading. The weight capacity of this system is 2,200 lbs which is lighter but it is the only option with the lift that you need that will still allow you to use the 5 on 4-1/2 bolt pattern hub. This is also an EZ lube spindle so it has a zerk fitting at the end to make greasing easier.
If you do not have the hubs and drums for electric brakes, I recommend part # AKHD-545-35-EZ-K that take 10" brake assemblies. This hub will allow you to use a 15" wheel with a 5 on 4-1/2 bolt pattern. I recommend to use the etrailer.com brake assemblies part # AKEBRK-35-SA that fit the brake flange of the Timbren spindle. Please let me know if you need a tire/wheel combo and what size. I am happy to assist further.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: How to Add Timbren Axleless Suspenion to a Trailer and Use 5 x 5 Lug Jeep Wheels
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Replacement 3,500 Pound Axle for Converted Military Trailer
- Q&A: Can Timbren Axle-Less Trailer Suspension System Be Welded To Trailer For Installation
- Q&A: What Parts Do I Need to Install the Timbren Axle-Less Trailer Suspension # T99GR?
- Article: How to Raise Your Travel Trailer Height
- Q&A: Which Side of Leaf Spring Suspension Does MORryde X-Factor Attach To
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Trailer Hitch Coupler
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide