How do Mud Flaps Install on my 2019 Ram 3500?

Question

Question:

What is the recommended installation procedure for mud flaps #337B1218LSP on a 2019 Ram 3500

asked by: Steve B

1

Helpful Expert Reply:

The Buyers Products Mud Flaps part # 337B1218LSP do not have a specific installation process as this is something that is more of a universal fit.

On your 2019 Ram 3500 you would trim the flap to fit the contour of your fender well and attach it to the steel that runs around the inner edge of the fender using fasteners of your choice (self tapping screws or machine bolts and nuts).

For a custom fit application I recommend using the WeatherTech Mud Flaps part # WT110108-120108 this is thefront and rear custom fit set for your truck. They will install without drilling or modifying your truck and are very durable and rugged. These do have actual instructions for their installation and are linked for you to check out.

expert reply by: Randy B

1

Answer 1

Hey Brent! Since this is for a saltwater application I recommend the Americana Metal, Bolt-In Valve Stem #AM20906. These have a chrome plated brass construction so they will hold up will in a marine environment. I do recommend rinsing with fresh…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

Hi Chase, welcome back! For the shackle straps and bolts I recommend the MORryde Suspension Upgrade Kit. This comes with wet bolts, bronze bushings, and 1/2" thick shackles. These parts will likely last as long as the trailer, and you won't…

view full answer...

Answer 9

The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…

view full answer...

How do Mud Flaps Install on my 2019 Ram 3500?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching