Can Spring Seats of Dexter Trailer Axle # 7685269-I be Moved
Updated 04/14/2020 | Published 04/13/2020
Question:
can the 80 inch center to center spring brackets be changed to 74 inches
asked by: Roy C
0
Expert Reply:
Yes, if you were okay with some welding you could remove the spring seats of the Dexter axle # 7685269-I and move them to 74 inches apart. This would likely void the warranty.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 95" Long - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Q&A: Which Direction Should Leaf Springs Be Installed on a Trailer
- Q&A: What Type of Breakers Does Powermax Panel PM59VR
- Q&A: What 3,500-Lb Axle Fits a Lightning Snowmobile Trailer With 80-Inch Spring Centers?
- Article: Dexter Service Bulletin #014
- Q&A: Comparing Dexter And etrailer Brand 6,000 lb Axles
- Q&A: Replacement Idler Hub w/a 5 on 4-1/2 Bolt Pattern that Has L68149 Inner and Outer Bearings
- Q&A: Can Magnetek 6345 Be Repaired Without Total Power Center Replacement
- Q&A: Do I Need Special Fuses Or Breakers When Installing New PowerMax Power Center Converter In RV?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)