Pictures of Flat Rub Rail Trim # 36286-955

Question

Question:

Can get picture part looking part cover where top an side join

asked by: Paul H

0

Expert Reply:

I checked with TRC and they sent me the following pictures for the Flat Rub Rail Trim for Enclosed Trailer # 36286-955 that you referenced.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The closest option we have is the Flat Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/4" Deep - Aluminum #36286-955 which is 1-1/2" wide, but is not white. The #36286-955 comes in 93-1/2" long stick but can be cut to size to…

view full answer...

Answer 2

Hi Jason, We're unable to verify what seal is on any specific trailer, unfortunately, so to determine the right one for your Jayco, you'll need to know the shape and take a quick measurement. The #SR26ZR is 3/4" wide x 1/2" tall and…

view full answer...

Answer 3

I went out to the warehouse and compressed both the #SR26ZR and the #SR76ZR and found that the #SR26ZR is approximately 3/8" thick when fully compressed and that the #SR76ZR compresses down to just a hair past 1/4". The base of the #SR26ZR…

view full answer...

Answer 4

I do have an option for you but we only offer the H-Channel for Enclosed Trailers part #36281-955 is one size, 93-1/2" long x 2" tall x 1-1/8" deep. That said, we do offer a C-Channel for Enclosed Trailers in 93-1/2" long x…

view full answer...

Answer 5

The H-Channel #36281-955(93-1/2 Long x 2 Tall x 1-1/8 Deep) you found is the only size H-Channel we currently carry.

view full answer...

Answer 6

Hey Jerald! I can't say I have heard of anyone adding the Timbren Silent Ride Suspension #TSR14KT01 (33" axle spacing) or #TSR14K35T01 (35" axle spacing) to their Grand Design but I'm sure some people have done it. This wouldn't…

view full answer...

Answer 7

With the brake controller gain turned all the way up, you should be seeing closer to 12-volts at your trailer connector. You are losing voltage somewhere between the brake controller and the trailer connector. I am assuming that by electric brake…

view full answer...

Answer 8

Ford didn't start equipping their trucks with the plug-and-play brake controller provision until the 1994 model year, so you'll need to hardwire the controller. This is a pretty simple process. First, you'll need to choose a controller. I…

view full answer...

Answer 9

We only carry the Dexter Electric Trailer Brake Assemblies Left #DX25QR and Right #DX52QR for your Dexter axle. We do not carry the replacement lever, magnet or hardware separately for these brake assemblies.

view full answer...

Answer 10

I do have an option for you but we do not offer the particular plug you are looking for nor am I aware of where it could be obtained. However, you can just use the Replacement Harness Repair Kit part #3371304744 for the male side and the Replacement…

view full answer...

Answer 11

While I do not know if Freedom Trailers uses the Top Rail Trim for Enclosed Trailer #36279-955, I was able to get some measurements for you. The Top Rail Trim for Enclosed Trailer #36279-955 is 8' long, 2-3/4" wide and 1-1/2" deep. Each…

view full answer...

Answer 12

The Uneven Rub Rail Trim for Enclosed Trailer #36283-955 is used to cover and protect unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. The trim has an aluminum construction and is sturdy and…

view full answer...

Pictures of Flat Rub Rail Trim # 36286-955

Product Page this Question was Asked From

Continue Researching