Are Lippert and Global Link Slam Latch Panels the Same

Question

Question:

You show a Lippert brand for $27.00 and a Global for $5.00 are they identical in size, shape and hole pattern

asked by: Kip

0

Expert Reply:

Yes, the Global Link slam latch panel # 295-000017 and the Lippert version # LC227840 are virtually identical and either could be used in the same application.

expert reply by: Jameson C

0

Answer 1

The Bauer Products RV Baggage Door Slam Latch #BA57FR can be keyed alike to other slam latches on the same order. Unfortunately, we do not have a way to ensure that it is keyed alike to the slam latches you already have in place.

view full answer...

Answer 2

The Bauer Products RV Baggage Door Slam Latch, #BA57FR is designed to replace the Bauer Products RV Baggage Door Slam Latch BP-20. It will also replace the Fastec (FIC) 30205. Global Link BLL-40101-2006 and BLL-50101-2006. If your latch that needs…

view full answer...

Answer 3

The replacement strike plate for your Global Link RV Entry Door Locking Latch Kit part #295-000019 is the strike plate part #GL94FR.

view full answer...

Answer 4

The Bauer Products RV Baggage Door Slam Latch part #BA57FR comes with a random key code. There is not an option to order this lock with a specific key code. That said, if you order multiple and select the key alike option on the product page you can…

view full answer...

Answer 5

The Bauer Products RV Baggage Door Slam Latch #BA57FR will fit cut outs that measure 3-1/4" tall x 4" wide (which is a fairly standard measurement). If that is the size of your cut out then this slam latch will work for you. While the Bauer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Are Lippert and Global Link Slam Latch Panels the Same

Product Page this Question was Asked From

Continue Researching