Recommended Gauge Wire To Use With Peterson Combination Trailer Tail Light
Published 01/28/2020 >
Products Featured in This Question
Question:
The wires on my trailer are not heavy enough to push into the 440-15L tail light. Don’t want to rewire. ???? 440-15L tail light
asked by: Mike H
Expert Reply:
You won't need to re-wire the tail lights. The 440-15L has been replaced with the Peterson Combination Trailer Tail Light - 7 part # 432400 and part # 432400 which does work best with 18 gauge wire however if you having trouble getting the wires to catch in the sockets you can strip more coating away and fold up the ends of the wire to double them before sticking them in the holes on the back of the light. There are also 4 holes for each side of the tail light and you can use the smaller holes on the bottom if that makes it easier. I have attached a video for your reference.
Product Page this Question was Asked From
Peterson Combination Trailer Tail Light - 7 Function - Incandescent - Square - Driver Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Square
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 4-3/4L x 4-1/2W Inch
- Red
- Peterson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: Will The Peterson M540 Light Kit Fit A Bracket With 2-1/4" of Head Room?
- Q&A: Does a Trailer Junction Box Have to be Used when Switching from 4-Way to 7-Way Trailer Connector
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Q&A: Replacement Hub for 10k Dexter Drum with 9-44 Marking
- Q&A: How to Easily Determine Trailer Wheel Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is 5 on 4-1/2 inch Bolt Pattern for Trailer Wheel
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)


