Will the Never Fail Bushings Work On a Grand Design Momentum
Updated 01/27/2020 | Published 01/26/2020
Products Featured in This Question
Question:
Will this fit on a 2016 Grand Design Momentum 327M?
asked by: Derick
0
Expert Reply:
The Never Fail Bushings part # LC279684 will work with pretty much any trailer with double eye leaf springs. The double eye leaf springs must also be 1-3/4" wide but this is pretty much standard for double-eye leaf spring so as long as you have double eye leaf springs then you should be just fine. Please note, it will be a good idea to replace the eye bolts when you are switching out the bushing so for this you can use part # TRFA73Z916DLNZ.
expert reply by:
Conner L
0
Continue Researching
- Search Results: lc279684
- Search Results: wheel bearing seals
- Search Results: nylon bushing
- Search Results: leaf spring bushing
- Q&A: Replacement for Dexter Electric Brake Kit 023-105-00
- Video: Complete Breakdown of the Dexter Electric Trailer Brakes
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs - 4-1/4" Front, 5-1/4" Rear
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Q&A: Does Bronze Bushing # K71-291-00 Fit Dexter 8000 lb Leaf Springs
- Q&A: Could Nylon Trailer Bushing part # TRBU13871 be Cut Down to Shorter Length
- Shop: Dexter Bronze Bushings - Qty 4
- Video: All About the Nylon Bushing
- Video: Let’s Check Out the Dexter Bronze Bushings
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 2" Long
- Video: Hands-On with the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Video: The Low-Down on the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Video: Hayes Spring Eye Bushing for 10k Springs Spec Review
- Video: The Low-Down on the Equalizer for 2" Wide Slipper Springs
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Hayes Spring Eye Bushing for 10k Springs
- Q&A: Are D-Washers and Tang Washers Both Necessary on Trailer Spindle
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Dust Cap Recommendation for Trailer Hub that is Slightly Smaller than 2.5 inch