List Of Parts Needed To Flat Tow 2020 Jeep Cherokee Trailhawk 4x4 With Transfer Case  

Question:

Expert Reply:

I am happy to assist you in figuring out which parts are needed to flat tow the 2020 Jeep Cherokee Trailhawk 4x4 with the transfer case. The 2020 Jeep Cherokee Trailhawk can only be flat towed if it a 4x4 with a 2-speed transfer case so you are good there. You need a base plate, tow bar, tow bar wiring, safety cables, a supplemental braking system, and possibly a high low adapter to flat tow the Jeep. I have attached links of parts I recommend below:

Demco Tabless Base Plate Kit part # DM9519340
Demco Excali-Bar III Non-Binding Tow Bar part # DM9511013 (comes with safety cables)
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267
SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 (if motor home has hydraulic brakes)
SMI Air Force One Supplemental Braking System part # SM99243 (if motor home has air brakes)

Finally you may need a high low adapter to tow the vehicle level with the motor home. In order to know how much rise or drop it will require to tow level some measuring is required. I have attached a helpful article that helps you figure out which high low adapter may be needed and our selection of high low adapters.

Please keep in mind, some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer. You will need this to install the supplemental braking system if you have the Mortorq fasteners.

expert reply by: Heather A

0

click to enlarge

click to enlarge

click to enlarge