Which Adjustable Receiver Hitch for Rear of Fifth Wheel Camper

Published 01/16/2020

Question:

Do you have the capability to view the frame dimensions by camper brand and model number to help us order the correct weld on type hitch?

asked by: James

Expert Reply:

Unfortunately we don't have ready access to that type of information.

The Curt adjustable hitches, part # 13703 fits frame members that are a maximum of 72 inches apart outside to outside or a minimum of 22 inches. The hitch can be bolted or welded in place, but the powder coating should be removed from the surfaces that will be welded. The ends of the hitch crossbar can be trimmed for length if necessary. Because of the huge 22-72 inch range, you'd be hard-pressed to find a camper that it won't fit. The only snag you might possibly hit would be if camper has a back bumper that hangs down far enough so it's bottom edge is greater than 3 inches below the underside of the camper's frame members where the hitch attaches.

You can see a typical installation video by clicking the provided link.

expert reply by: Mike L