What Are Each of the Fittings On the Phoenix Faucets Hybrid RV Kitchen Faucet Pull Out Spout For

Updated 01/13/2020 | Published 01/11/2020

Question:

The pull out faucet has a brass male end for the quick connect and will not hook up to the plastic female end . The pictures show a black plastic male end. Do I have the wrong parts?

asked by: Ken

Expert Reply:

In regards to the Phoenix Faucets Hybrid RV Kitchen Faucet part # PF231441, there are three connections. The first connection is a black plastic, spring loaded quick connector fitting which attaches the pull out sprayer to the faucet to form a loop. The other two brass NPT fittings then go to the hot and cold water supply. The hot and cold water supply lines may have different fittings on the trailer side so if that is the case then you would simply need adapters which can be obtained from any local hardware/home improvement store. There should be no plastic and metal fittings joining one another.

If you can send photos of what you currently have I may be able to offer additional assistance but I am not exactly sure what you are trying to describe. I was also not able to see any order info using the email you provided. If you take a look at the attached review video, this may help clear any confusion as well.

expert reply by: Conner L