Replacement Air Lift Air Bag for Kit Installed on 2006 Chevy Silverado 1500 4WD

Question

Question:

Hello, I am looking to replace an airlift lift loader 5000 spring that was purchased for a 1999-2006 Chevrolet Silverado 1500 4WD airbag suspension kit. Could you help me figure out the correct part number for this? Thanks!

asked by: Jace

0

Expert Reply:

We have the replacement air bag you are in need of with part number # AL84290 which is correct for the kit you'd have installed on your 2006 Chevy Silverado 1500 4WD # AL57272.

expert reply by: Jameson C

0

Answer 1

Yes, we do have air helper spring options for a 2003 GMC Sierra 1500 LD. I recommend the Air Lift LoadLifter 5000 Air Helper Springs part #AL57272 which is the only available double bellow system. This kit is a direct bolt-on fit with no drilling…

view full answer...

Answer 2

Since you have the 2WD version of the 2005 Chevy Siliverado 1500 you'd need to go with the #AL57250 as the #AL57272 does not fit the 2WD models.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 8

The correct replacement airbag for your Air Lift LoadLifter 5000 part 5813 is the Replacement Air Spring for Air Lift LoadLifter 5000 part #AL50201.

view full answer...

Answer 9

Since winches draw quite a bit of amperage you'll need a winch wiring kit that uses heavy gauge wires to keep your trailer battery charged. On the trailer side you'd want the 7-1/2 foot long wiring kit part #BDW20347 which uses 1 gauge wire…

view full answer...

Answer 10

Hello Steven, thanks for reaching out. For your 2010 GMC 2500 Extended Cab with the 8' bed you will want the Curt Trailer Hitch Receiver #C15312. This is specifically designed for the 2500 long bed models. The #C15302 hitch you mentioned is for…

view full answer...

Answer 11

Hey Austin! The correct set of 5th wheel rails for a 2004 GMC Sierra 2500 are going to be the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC item #C16418-204. This set of rails is industry standard which means it will work with most 5th wheel…

view full answer...

Replacement Air Lift Air Bag for Kit Installed on 2006 Chevy Silverado 1500 4WD

Products Featured in This Question

Continue Researching