Timbrens For 2020 Ram 1500 With Rear Sag Towing Heavier Fifth Wheel Trailer

Question

Question:

I am towing a larger fifth wheel trailer with my 2020 Ram 1500 and I am experiencing rear sag. Which Timbrens would work for me? I don't see any on the website for my truck and im not sure about the SumoSpring Rebel Springs. What do you think? It's 4WD

asked by: Kristina

0

Expert Reply:

There is a Timbren Rear Suspension Enhancement System that is compatible with the 2020 Ram 1500 4WD with part # TDR1500DQ as confirmed by Timbren. Since you are experiencing rear sag I do recommend to use the Timbrens because they are the best option to reduce the sag. They are made of a dense rubber material that increases the stability of the suspension when hauling heavier loads. They also act as a shock absorber to extend the life of your suspension.

The SumoSprings Rebel Springs that you referenced part # SSR-301-40-2 are a good option but won't help to reduce the rear sag as much as the Timbrens will.

expert reply by: Heather A

0

Answer 1

Hello Anthony. For your 2022 Ram 1500 4WD Quad Cab I recommend the Timbren Rear Suspension Enhancement System #TDR1500DQ. This is the only Timbren set we offer for the quad cab model. They have a 8,600 lb capacity so they will do a great job…

view full answer...

Answer 2

The primary difference between the Timbren Rear Suspension Enhancement System #TDR1500DQ and the SumoSprings #SSR-307-47 for the rear axle of your 2019 Ram 1500 is their overall strength. The Timbrens feature a much denser rubber construction and…

view full answer...

Answer 3

I would be happy to help you and have a great suggestion for upgrading your suspension when towing your trailer but I do not recommend either Timbren set for your 2022 Ram 1500. TImbren's will give you a stiff and bouncy ride when you are not…

view full answer...

Answer 4

For your 2021 Ram 1500 Classic, the better option for your suspension enhancement between the Timbrens and SumoSprings is definitely going to be the SumoSprings, with the correct fit for your truck being the following part number: - SumoSprings Solo…

view full answer...

Answer 5

We have found that it varies a little bit between vehicles. For some vehicles the unloaded ride quality is totally unaffected with the Timbrens. Typically this is on higher capacity vehicles where the suspension is already pretty stiff and…

view full answer...

Answer 6

For your 2024 Toyota Tundra, I recommend the Timbren Active Off-Road Bumpstops item #T83MR because they are the lowest capacity options for Timbrens. They will still offer you plenty of support but you definitely do not need the severe kit. These…

view full answer...

Answer 7

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 8

The Timbren Rear Suspension Enhancement System part #TGMRCK15S is a great option to help reduce sag while towing with a 2017 Chevrolet Silverado 1500 but they do have a tendency to ride rough as the material is very dense. I think the perfect option…

view full answer...

Answer 9

In regards to ride quality, this would be unaffected while unloaded unless going over bumps or large dips in the road. The correct Timbren Rear Suspension Enhancement System for a 2016 Ram 1500 is part #TDR1500DQ. That said, when this happens I do…

view full answer...

Answer 10

Hey Richard, thanks for reaching out and giving your experience! The Timbren brand is really popular because they've built a name for themselves and while they do work, a common theme we've discovered with them is that they are too stiff,…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Timbrens For 2020 Ram 1500 With Rear Sag Towing Heavier Fifth Wheel Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching