MaxxFan 2016 Keystone Montana Model 3710FL Won't Stop Running
Published 11/15/2019
Products Featured in This Question
Question:
Jon, I reinserted the fuse, and have the same condition. The fan runs at a high rate, but no control from the wall mounted control. The info on the fan is: MAXXFAN-SMOKE 4951KS S/N 2015-11-A4951KS-A00091
asked by: Fred D
Expert Reply:
If your MaxxFan with the rain sensor, like part # MA00-04500K, starts operating automatically and the controller or the controls on the unit aren't working then that sounds like a bad circuit board or that the built-in safety feature for too much (or not enough) voltage was activated and the circuit board locked up. Since you already removed power from the vent try connecting it back to power. If it works properly then it was just locked up and needed to be disconnected from power to unlock the circuit board. If that doesn't work then something damaged the circuit board, like water, and it needs to be replaced.
For this roof vent, or parts # MA00-07000K and # MA00-07500K, the replacement circuit board is part # MA10A21275K. These are 10 speed fans though so I'd need to know the model number of your MaxxFan so I can ensure we get you the correct replacement circuit board.
Really the only other thing that would be wrong is if one of the buttons that controls the unit were messing up but it sounds like you've already done some basic troubleshooting so I would imagine you've already checked out the controls.
Let me know what unit you have and I can recommend the correct replacement circuit board for your application.
Product Page this Question was Asked From
MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- RV Vents and Fans
- Vent
- Roof Vent
- Powered Lift
- 12V Fan
- Reversible Fan
- Plastic
- Tinted
- MAXXAIR
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Correct Replacement For A MaxxFan 4951KS
- Q&A: Looking for Replacement Bathroom Vent for 2009 Keystone Sprinter Travel Trailer
- Q&A: Can I replace the Coleman Max Q AC in my 2024 Alliance 26RD with a MaxxFan?
- Q&A: Recommended Replacement Fan for a MaxxAir 4951 With a White Lid
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Can Hitch Ball be Greased When Using Andersen Weight Distribution System
- Q&A: Replacement Dexter Trailer Brake Kit To Replace Dexter 36-19 Brake Assemblies
- Q&A: Replacement Entry Door Latch for Trimark Motorhome
- Article: Stability Control for Heavy Duty Vehicles
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
Fred
11/15/2019
Jon, I reinserted the fuse, and have the same condition. The fan runs at a high rate, but no control from the wall mounted control. The info on the fan is: MAXXFAN-SMOKE 4951KS S/N 2015-11-A4951KS-A00091