Replacing The Front Clamp On The Extang Trifold Cover

Updated 11/12/2019 | Published 11/11/2019

Question:

I followed your previous answer to this question, but the crossbar does not due to the steel price extending from the rail on both sides of the crossbar. How do I release them?

asked by: David

Expert Reply:

I reached out to Extang directly regarding your inquiry on the Replacement Cab Clamp # EX1034. They advise to release the clamps, remove the tarp from the rails so that the frame loses enough tension to be pulled apart. Included is the tarp replacement guide that explains how this process is done.

You will skip steps 1 & 2. You DO NOT need to cut the tarp.

Once the tarp is removed, you should have enough slack in the frame to allow these bows (crossbars) to be pulled from the siderails.

expert reply by: Patrick R