What is Hub Bore Diameter of Dexter Hubs # 84556UC3 and # 84656UC3
Updated 11/04/2019 | Published 11/03/2019
Products Featured in This Question
Question:
What is the minimum size wheel center hole that can be used on p/ns 84556UC3 and 84656UC3
asked by: Jeff O
0
Expert Reply:
The outer diameter of the center bore of the Dexter Trailer Hub and Drum Assembly, # 84556UC3 and # 84656UC3 is 2.67 inches. Most wheels that would be used with this hub would have a pilot diameter of 3.19 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Wear Sleeve For A 3500 Pound Dexter E-Z Lube Axle On A Travel Trailer
- Q&A: Replacement For A Dexter 8-249 Hub And Drum Assembly
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Can Grease Be Cleaned Off Of A Brake Magnet And Brake Assembly?
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Q&A: Can Brakes be Added to 3,500 Pound Dexter Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Trailer Maintenance Schedule
- Article: Double-Eye Trailer Suspension System Review
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Accurately Measure Trailer Leaf Springs