Can Curt TruTrack Weight Distribution Have Tongue Weight Rating of Spring Bars Increased

Published 09/30/2019

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(623)

$609.95

Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control - 15,000 lbs

(2)

$331.42

Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System - 1,500 lbs TW

(15)

$77.74

Question:

I currently have the Curt 17500 assembly. Looking at the trunion bars they all measure 9/16 and I was thinking about purchasing the C17537 to gain the extra capacity and using them in my Curt 17500 head?

asked by: Robert W

Helpful Expert Reply:

The two Curt systems you have are very similar but to swap bars between the two you'd have to also swap the heads since the bars are different sized. So for a head you'd need the part # C17509 and the bars # C17537 and you'd have upgraded your system to the higher rated 1,000 lbs - 1,500 lbs tongue weight setup.

In general we recommend people set up their WD systems on vehicles with air ride by first putting the weight of the trailer on the ball mount, letting it settle, and then run through the setup process. Your method seems pretty interesting too and I would agree it is beneficial to know.

expert reply by: Jameson C

click to enlarge

Robert W.

9/30/2019

Jameson C.

9/30/2019

That's a tempting solution, but the heads have different weight ratings so it would not be safe to try and use the higher rated bars in the lower rated head.