Vinyl Trim Insert for 5/8 Channel

Question

Question:

Do I buy a 7/8 strip for a 5/8 channel?

asked by: Yolanda

0

Expert Reply:

To determine what the right size of vinyl insert is you need, it is best to measure your current insert as it is laid flat, as opposed to the channel, though it sounds like what you need is actually going to be a 3/4" insert, for which we have the following:

- Camco RV Vinyl Trim Insert - Black - 100' Long # CAM25272
- White - 100' Long # CAM25262
- Beige - 25' Long x 3/4" Wide # CAM25153 or 100' Long # CAM25252
- Colonial White - 100' Long # CAM25242

I have added links to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 2

It sounds like you have the 3/4 inch trim on your RV, which we do carry. For a 25-ft roll you can use part #CAM25173, and for a 100-ft roll you can order part #CAM25272.

view full answer...

Answer 3

The trims inserts are a universal fit so the key to finding the correct one for your 2019 Keystone Premier travel trailer is to measure the trim to determine what the proper width would be. The Camco RV Vinyl Trim Insert #CAM25312-10 you were looking…

view full answer...

Answer 4

Hi Mark; we don't know all of the differences between those different models, and only the #DOM67FR remains available. All of the others have been discontinued. Dometic makes slight changes and upgrades over time but those typically aren't…

view full answer...

Answer 5

Hey Charlie, I can't find a record of you asking this question in past so maybe there was a typo in your email address so it never got back to you. Or maybe you used a different email? It sounds like you are looking for the Camco RV Vinyl Trim…

view full answer...

Answer 6

Though we do not have any type of specific parts or any type of database of parts lists (trailer manufacturers do not keep a list of parts we have access to) we do have trim that may work for you. Depending on the width and color you need there is…

view full answer...

Answer 7

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 8

Hey Doug, from what I can see, the Camco RV Vinyl Trim Insert #CAM25312-10 and the Camco RV Vinyl Trim Insert #CAM25212 are the exact same. They both are 100' x 1", have the same shape, and are both made from Vinyl. I'm not too sure why…

view full answer...

Answer 9

If your vinyl trim track on your travel trailer is 1 inch wide from outside edge to outside edge you'd need 3/4 inch wide vinyl trim as the trim fits into the track. So for 100 feet of black 3/4 inch wide trim you'd want the #CAM25272.

view full answer...

Answer 10

If the old sealant only has minor cracks you can use a sealant like the LaSalle Bristol XTRM Universal Self-Leveling Sealant #34427034145-1 which is a little easier to work with than the Alpha Systems 1021 Self-Leveling Sealant for RVs #AL98KV. You…

view full answer...

Answer 11

It sounds like you may need the 3/4 inch trim. We have some in white, 25 feet long, #CAM25163, Colonial white, 25 feet long, #CAM25143, and black, 25 feet long #CAM25173.

view full answer...

Answer 12

You could remove the roof to fix the staples but that would require a ton of work and can be costly, which is why Alpha said it would be overkill. You could just hammer the staples back down and just use some self leveling sealant like the Alpha…

view full answer...

Vinyl Trim Insert for 5/8 Channel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching