Disc Brake Conversion Kit for 1991 Shore Lander Trailer
Updated 09/11/2019 | Published 09/09/2019
Products Featured in This Question
Question:
I have a 1991 Shore lander and would like to convert to disc brakes. What parts do I need?
asked by: Jeff
Expert Reply:
Yes. In order to add hydraulic disc brakes you will need to use the Kodiak Disc Brake Kit # K2R35S and the HydraStar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes # CAR-HBA16-2, which will give you a completely new disc brake setup for your 1991 Shorelander. The Kodiak Disc Brake Kit # K2R35S uses a 10" rotor with a 5 on 4-1/2 bolt pattern and has a capacity of 3500-lbs, which will work well for your Shorelander. The Hydrastar kit comes with an actuator and all of the brake lines needed to install disc brakes on a tandem axle trailer. If you happened to need lines for a 3rd axle you can use the Hydraulic Line Kit for 3rd Axles # 9579-01.
If you don't already have a brake controller that is compatible with Electric over Hydraulic brakes, you'll want to upgrade to one that is. I recommend using the Tekonsha Prodigy P3 # 90195, which is a proportional brake controller that works well with Electric over Hydraulic brakes and is one of our most well reviewed controllers.
If you have a different wheel bolt pattern, let me know and I can recommend a more appropriate conversion kit.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking To Replace Tie Down Engineering Brake Pads And Rotors
- Q&A: Replacement Brake Pad and Rotor for Kodiak Stainless Steel 10" Disc Brake Kit
- Q&A: Does The Kodiak Disc Brake Kit K2R35S Come With Lug Nuts?
- Q&A: Replacement Brake Calipers and Mounting Brackets for Load Rite Tandem Axle Trailer with 3.5K Alxes
- Q&A: What Brake Pads Does Kodiak Disc Brake Kit # K2R35S Come With
- Q&A: Stainless Steel Disc Brake Setup for Tie Down Engineering 3500 lb Axle
- Q&A: Do 10 Inch Kodiak Stainless Steel Disc Brakes Work With Oil Bath Hubs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers