Shaft Diameter of the Lippert Components Spare Tire Winch with Offset Cable # LC159056

Question

Question:

what is the shaft diameter?

asked by: Craig

0

Expert Reply:

The shaft diameter of the Lippert Components Spare Tire Winch with Offset Cable # LC159056 is 1/2 inch. It's designed to be used with the intermediate shaft # LC1315411.

expert reply by: Jameson C

0

Answer 1

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Hello Travis, Thanks for writing in! Your father-in-law's Demco Autoslide 5th Wheel Trailer Hitch for Dodge Ram - Single Jaw - Above Bed - 18,000 lbs #DM59XV is built to mount to industry-standard above-bed rails, so it won't drop right into…

view full answer...

Answer 7

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 8

Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…

view full answer...

Answer 9

Hey Alan! The best upgraded equalizer is the one that matches the measurements on your current equalizer. This keeps your suspension geometry the same. The Lippert Road Armor Shock-Absorbing Equalizer Kit #LC53CK you were looking at is a good option…

view full answer...

Answer 10

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 11

Hey Joe, thanks for reaching out! You're going to want the Hellwig Adjustable Rear Anti-Sway Bar #HE44FR for your 2024 Ford F-350 Super Duty with the Tremor package.

view full answer...

Answer 12

Hey Tyler! The B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW73FR is the correct model for your 2025 Ford F-250. This does not come with a wiring harness so you will also need the Curt 5th Wheel/Gooseneck Custom Wiring Harness #C57008.…

view full answer...

Shaft Diameter of the Lippert Components Spare Tire Winch with Offset Cable # LC159056

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching