Replacement Landing Gear Leg for 2015 Jayco Seismic 5th Wheel Toy Hauler

Published 08/30/2019

Question:

I saw a comment that this didnt fit properly for one customer. I confirmed with lippert that i need 241846. Do the outpouchings that hold up the rv on the bracket match up to oem?

asked by: Charles M

Expert Reply:

I believe you are asking about the weld stops on the Replacement Heavy Duty Landing Gear Master Leg # LC241846.
As shown in the attached diagram, the distance from the top of the upper weld stop to the bottom of the lower one on # LC241846 is 17.5 inches. This means that as long as the frame clamps that are currently welded on your 5th wheel are 17.5 inches apart (inside to inside) then this is the correct replacement. The frame clamps or weld brackets can be cut and re-welded in the proper location if they are not 17.5 inches apart.

The # LC241846 is intended to replace the heavy duty master leg on Lippert Components 900-56RFL Landing Gear, most commonly referred to as Lippert Ground Control 2.0 Series. The Jayco cross-reference number for this replacement part is 0235480.

expert reply by: Carla M