What Size Is Replacement Angle Set Bolt for Equal-i-zer Weight Distribution Head EQ90-03-9700

Updated 04/21/2025 | Published 08/14/2019

Question:

Is this angle set bolt 7/16 x 1 1/2 long?

asked by: Mike H

Expert Reply:

The Replacement Angle Set Bolt for Equal-i-zer Weight Distribution Head part # EQ90-03-9700 is the replacement bolt used to achieve proper positioning of the weight distribution head on the Equal-i-zer systems rated for 4,000 lbs to 12,000 lbs. They are 5/8" x 4-1/2" bolts. It sounds like you may need the sway control bracket bolts. If you let me know which bolt you are looking for on the system, I can assist you further.

expert reply by: Heather A

Vj L.

3/23/2025

Just want to let you know the expert reply is not accurate. The angle set bolts are not 4 1/2” x5/8”. Per the manual, the angle set bolt 90-03-9700 is 7/16” x 1 1/2”.