Availability of Dexter 4 Drop Axle with Idler Hub with 5 on 5-1/2 Bolt Pattern
Published 07/25/2019 >
Products Featured in This Question
Question:
I need two axles with 4 inch drop,89 inches to hub face, but the problem im having is to find them with 5-5.5 lug pattern. is there a way to order them this way. I have measured the distance between studs to center and get 3 1/4. please advise me on the best way to accomplish this. I didnt want to have to buy new rims and tires to fit the 5-4.5 hubs.
asked by: Brandon P
Expert Reply:
The Dexter Trailer Axle Beam w/ Idler Hubs # 8327812-I that you referenced is a kit that includes the following:
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - # 8327812
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - # 84545UC1-EZ
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge Item # L11390
Since you are needing a 5 on 5-1/2" bolt pattern for the hub you can simply order the axle beam and the bearing grease from the kit above and then order the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84555UC1-EZ as well which has the 5 on 5-1/2" bolt pattern you are looking for.
Something else to keep in mind is that this axle has a spring center measurement of 74". You need to make sure this matches your application as well to confirm that this trailer axle is the correct fit for you.
Product Page this Question was Asked From
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: What Type of Breakers Does Powermax Panel PM59VR
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Replacement Idler Hub w/a 5 on 4-1/2 Bolt Pattern that Has L68149 Inner and Outer Bearings
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: Can Magnetek 6345 Be Repaired Without Total Power Center Replacement
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub




