How To Adjust the Legs On the Lippert Ground Control Leveling System Separately

Updated 11/17/2024 | Published 07/14/2019

Question:

How do you manually adjust one jack at a time, each side individually? Example I need to extend just the right rear jack or just the front right?

asked by: Angela K

Expert Reply:

I took a look at the manual for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590 and on page 4 it states the proper procedure to extend each of the jacks separately. I have attached this procedure for you below:

"Landing gear (front jacks) can be operated any time the system is “ON”. By pushing the “FRONT” button (Fig. 1G),
both front jacks can be extended. By pushing either the "FRONT" and “LEFT” (Fig. 1H) or "FRONT" and “RIGHT” (Fig.
1I) buttons, the individual front jacks can be extended. If the touch pad is put in the retract mode, indicated by
the orange illuminated LED next to the “RETRACT” button (Fig. 1D), the front jacks can be retracted together by
pushing the “FRONT” button (Fig. 1G) or individually by pressing “LEFT” (Fig. 1H) or “RIGHT” (Fig. 1I) buttons, while
simultaneously pressing the “FRONT” button (Fig. 1G)."

expert reply by: Conner L

click to enlarge

Debra

11/17/2024

Conner your explanation of extending jacks on at a time is very timely for me as my front left seems to have gone down unleveling my 5th wheel. My question is whether I can do this with my slides out as I gave been set up there for a couple of months Thank you