Can Timbren Suspension Kit Install on 2003 Toyota Tacoma with 2.5 inch Lift

Updated 07/15/2019 | Published 07/13/2019

Products Featured in This Question

Timbren Rear Suspension Enhancement System

(6318)

$269.36

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(140)

$16.57

Timbren 1/2" Spacer for Raised Frame Vehicles

(59)

$11.71

Question:

I have a 2003 Tacoma that I bought that came with a small lift. The distance from the leaf to the frame is 9.5. My previous 2000 Tacoma had a leaf to frame distance of 7. Is there something I can add to the Timbren springs so that the distance between the spring and the frame is similar to a non-lifted Tacoma?

asked by: Ben

Expert Reply:

Timbren does make spacers like the part # A25723-90AH00 for a 1 inch spacer and # TA25722-90P00 for a 1/2 inch spacer which you can use to take up extra space created by lift kits so that you can still use their suspension enhancement kits like the # TTORTAC4A that you referenced.

You'd need to use an amount of spacers that takes up the added distance created by the lift. So in this case you'd need two 1-inch spacers and a 1/2 inch spacer per side of the vehicle.

expert reply by: Jameson C