Timbren Suspension Kit Recommendation for 2002 Toyota Tacoma

Question

Question:

Greetings! I have a 2004 Tacoma 4x4 2.7L and have just installed a camper ~600# and was wondering what you would recommend with the timbrens. Just want to level the camper out as itll be on there for the next year as I travel the US. Afterwards itll be taken off and Id like to still maintain a smooth ride with no jarring impact feel if i hit a pot hole. Thank you for the help

asked by: Paul

0

Expert Reply:

The Timbren kit part # TTORTAC4A would be what you would need.

expert reply by: Jameson C

0

Answer 1

For your application with an extra leaf spring already installed on the 1995 Toyota Tacoma, I would go with the Timbren Rear Suspension Enhancement System, #TTORTAC4A. It will not affect the empty ride of the vehicle, the springs get more rigid under…

view full answer...

Answer 2

Timbren does make spacers like the part #A25723-90AH00 for a 1 inch spacer and #TA25722-90P00 for a 1/2 inch spacer which you can use to take up extra space created by lift kits so that you can still use their suspension enhancement kits like the…

view full answer...

Answer 3

The Timbren Suspension Enhancement System #TDVR05091 is designed to bolt right onto your 1994 Toyota pickup. This will replace your truck's current bump stop by bolting to the frame in the same location. You should know that the Timbrens are to…

view full answer...

Answer 4

I do have an option for you but we don't offer air bags for a 1991 Toyota Pickup. Instead, I recommend upgraded jounce bumpers like the Timbren Rear Suspension Enhancement System part #TTORTAC4A which offers a bolt-on fit and works well to reduce…

view full answer...

Answer 5

The helper springs in Timbren kit #TTORTAC4A are 5-1/8 inches tall by themselves. The overall height of the whole assembly will be a little taller. Does your 2004 Toyota Tacoma have a suspension lift?

view full answer...

Answer 6

Due to the design of the Timbren Rear Suspension Enhancement System #TTORTAC4A on your 2002 Toyota Tacoma the screw that would normally sit in that position is welded on as you do not have access to the head of the screw when it is installed on your…

view full answer...

Answer 7

I reached out to my contact at Timbren and the Timbren Rear Suspension Enhancement System #TTORTAC4A you were looking at for your 2000 Toyota Tacoma will not hardly compress at all until you reach 4800lbs on the rear suspension. After 4800lbs you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Timbren Suspension Kit Recommendation for 2002 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching