What is Procedure to Tow 2017 Jeep Grand Cherokee 4x4 on Tow Dolly
Updated 07/20/2026 | Published 07/10/2019
Question:
I looked up the owners manual of your 2017 Jeep Grand Cherokee and found the following as instructions for towing the vehicle with a tow dolly: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the front wheels onto the tow dolly. 3. Apply the parking brake. Place transmission in PARK. Turn the engine OFF. 4. Properly secure the front wheels to the dolly, following the dolly manufacturer’s instructions. 5. Turn the ignition to the ON/RUN mode, but do not start the engine. 6. Press and hold the brake pedal. 7. Release the parking brake. 8. Turn the ignition OFF, remove the key fob, and release the brake pedal.
asked by: Tim
Expert Reply:
I looked up the owners manual of your 2017 Jeep Grand Cherokee and found the following as instructions for towing the vehicle with a tow dolly:
1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions.
2. Drive the front wheels onto the tow dolly.
3. Apply the parking brake. Place transmission in PARK. Turn the engine OFF.
4. Properly secure the front wheels to the dolly, following the dolly manufacturer’s instructions.
5. Turn the ignition to the ON/RUN mode, but do not start the engine.
6. Press and hold the brake pedal.
7. Release the parking brake.
8. Turn the ignition OFF, remove the key fob, and release the brake pedal.
Ron H.
7/17/2026
I don't think the would be correct for the 4WD. It looks like it would be for FWD only. Please correct me if I am wrong.
Jameson C.
7/20/2026
Product Page this Question was Asked From
Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs
- Trailers
- Tow Dolly
- Wheel Decks
- 4250 lbs
- Cars/Trucks/SUVs
- Powder Coated Steel
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Gustafson 12V RV LED Puck Light Review
- Shop: RV Interior Lighting
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Can You Flat Tow a Jeep Compass?
- Q&A: Can 2005 Jeep Grand Grand Cherokee Be Flat Towed on Tow Dolly
- Q&A: Can a 2020 GMC Terrain SLT Be Flat Towed
- Shop: Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel
- Shop: Gustafson 12V RV LED Wall Light w/ Light Shade - 10" Tall - Clear/Satin Nickel
- Shop: Gustafson 12V RV LED Puck Light - Surface Mount - 4-3/8" Diameter - Warm White
- Shop: Gustafson 12V RV Vanity Light w/ Light Shade - 18" Long - White Acrylic - Satin Nickel
- Shop: 12V RV LED Puck Light - Surface Mount - 3" Diameter - White Trim
- Shop: Gustafson 12V RV Vanity Light w/ Light Shades - 18-1/2" Long - White Glass - Satin Nickel
- Shop: Gustafson 12V RV Wall Light w Light Shade - 9-3/4" Tall - Frosted White Glass - Satin Nickel
- Shop: RV Antenna and Radio
- Q&A: Replacement Entry Door Lock For A 2022 Newmar 4037
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Recommended SnapPad Jack Pads for a HWH Leveling System on a Motorhome
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
on Trailers
Tim
7/10/2019
I looked up the owners manual of your 2017 Jeep Grand Cherokee and found the following as instructions for towing the vehicle with a tow dolly: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the front wheels onto the tow dolly. 3. Apply the parking brake. Place transmission in PARK. Turn the engine OFF. 4. Properly secure the front wheels to the dolly, following the dolly manufacturer’s instructions. 5. Turn the ignition to the ON/RUN mode, but do not start the engine. 6. Press and hold the brake pedal. 7. Release the parking brake. 8. Turn the ignition OFF, remove the key fob, and release the brake pedal.