Can 2013 Fiat 500 be Towed on Dolly  

To flat tow your 2015 Fiat 500 Pop behind your RV you will need base plates, a tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend the Blue Ox base plates #BX2801. Our installers find that the Blue Ox base plates…

The Blue Ox base plates between the 2013 and 2017 Fiat 500 models are the same as long as you have the same sub model for the vehicle. It looks like the mounting locations are the same for the products but the difference is where the tabs are located…

I looked up a copy of the owner's manual for your 2017 Fiat 500 online and it looks like you can flat tow your Fiat as long as it has a manual transmission otherwise a tow dolly must be used. Let me know if this is the case and I can make a…

In order to have both the tow dolly's and towed vehicle's lights active at the same time while being pulled behind a motorhome, the motorhome's trailer lighting circuits must be rated for the amp draw of both sets of lights. If that is…

Typically it is required to disconnected the negative terminal on your towed vehicle to avoid unauthorized use of your vehicle or unwanted battery consumption when not used for long periods of time. However I did also check the owner's manual for…

Capacity-wise the Trailer Valet Swivel Jack and Trailer Mover #STC-V211 that you referenced would work well for you since it has a 500 lb tongue weight capacity and your tongue weight is 325 lbs. The bracket takes up 8 inches of real estate on the…

Your 2016 Kia Soul with Sportmatic automatic transmission can be towed on either of the two Roadmaster Tow Dollys we carry as long as you have the 16 inch wheels. The 17 or 18 inch wheels will not work. The factory 205/60-16 tires will work well on…

The electric brakes on the RoadMaster Tow Dolly, part #RM-2050-1, only engage when you activate the brakes on your tow vehicle. Your tow vehicle brakes send a braking signal to the (required) brake controller which in turn tells the electric brakes…

Honestly if your plan is to flat tow two different vehicles and are looking for the easiest setup our best option is going to be a tow dolly like part #RM-2050-1. By the time you buy everything needed for two different vehicles and pay to have the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…