How Tight Should Lug Nuts of Trailer with 15 inch Steel Wheel Be
Updated 06/24/2019 | Published 06/22/2019
Question:
What would the lug nut torque be on a 6X8 2 wheel motorcycle trailer with 15 inch steel wheels
asked by: Ken W
0
Expert Reply:
Since your wheels are 15 inches in diameter and the wheel material is steel the correct amount of torque to use for the lug nuts is between 90 and 120 ft lbs.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Hubs and Electric Brakes do I Need for My 1995 Casita Trailer?
- Q&A: What is Height of Power Mountain Tallboy Off Road Bottle Jack When Retracted and Extended
- Q&A: Hub and Drums for a 1995 Casita Trailer
- Q&A: Parts Needed to Install a Autowbrake and 7-Way for Towing w/a 2022 Toyota RAV-4 Hybrid
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Correct Bearing Kit for Scamp 13 Trailer with Lippert 2,200 lb Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Looking for Wheel Center Cap AC-375TT
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub