Is a High Rise Hitch Ball Needed To Tow With The Bumper On a 2015 Chevrolet Colorado
Updated 06/24/2019 | Published 06/21/2019 >
Products Featured in This Question
Question:
Will a 2 inch ball rise ball allow me to utilize the factory hitch that is part of the Colorado’s bumper? A standard ball doesn’t give enough clearance to keep from damaging the bumpers cosmetic plastic cover....
asked by: Aaron B
Expert Reply:
That is a great question but I am afraid this is not something that we have been able to test our self that way we cannot confirm this for you and it would also be dependent on the height of your trailer coupler. However, if you feel the 2" of extra clearance is enough to help keep the coupler off the plastic rear fascia then we do have an option for you but this will be dependent on what size hole you have for the shank and what size hitch ball is needed. For example, the Hitch Ball part # C40034 has a 2" diameter ball, 2" rise, and a 1" diameter shank but I have attached a list of our other options for you.
If you don't think this will work or you have a trailer over 3,500 lbs then you will need to use a frame mounted trailer hitch like the Curt Trailer Hitch Receiver part # C13176 as this would be your only other option.
Product Page this Question was Asked From
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- High-Rise Ball
- Chrome
- 6000 lbs GTW
- 2 Inch Diameter Ball
- 1 Inch Diameter Shank
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Get a Ball Mount with 0 inches of Rise or Drop
- Q&A: How Does The Ultimate Trailer Jack Fold Up For Travel
- Q&A: Will Tie Down Side-Mount Spare Tire Mount Fit 3" Tall Trailer Tongue
- Q&A: Parts Needed to Install 7-Way Trailer Wiring on 2014 Subaru Forester
- Q&A: Why Do Hitch Extenders Reduce Hitch Capacity but Long Ball Mounts Do Not
- Q&A: Could Replacement 2" Ball with Nut For Pintle Hitch # 337RB102000 be Used on Ball Mount
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Determining Trailer Tongue Weight
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Wiring Diagrams
- Article: Trailer Jacks
- Article: How to Measure for Trailer Hitch Drop
- Article: Is It Illegal to Leave My Hitch on My Truck?

