Could Replacement 2" Ball with Nut For Pintle Hitch # 337RB102000 be Used on Ball Mount

Question

Question:

Can you use this ball with a standard hitch mount?

asked by: Ryan

0

Expert Reply:

The non-threaded portion of the Replacement 2" Ball with Nut For Buyers Products Combination Pintle Hitch # 337RB102000 is taller than most hitch balls but it has a diameter compatible with a lot of ball mounts as it's shank diameter is 1-1/4 inch. With enough washers though I am sure it would work fine.

expert reply by: Jameson C

0

Answer 1

If your tow vehicle has a 2-1/2 inch hitch opening then Curt extension #C45048 is a great option to give you more length between the vehicle and trailer so you won't have to dunk your tail pipe in the water. If your vehicle does not have a 2-1/2…

view full answer...

Answer 2

Hey Brent, I have no idea why there are different pintle hitch designs. I do know that Curt changed the pintle mount attachment that comes with the 20,000 lbs Curt Pintle Hook item #C45908. It now comes with the Curt Pintle Hook with 2-5/16"…

view full answer...

Answer 3

Yes, it will! The Curt Pintle Hook with 2-5/16" Ball item #C45908 will easily connect to your portable silo's lunette ring and allow you to safely tow it. This ball mount fits a 2-1/2" hitch receiver, includes a 2-5/16" hitch ball,…

view full answer...

Answer 4

You could put a 2 inch ball in place of the 2-5/16 inch ball on Pintle Hook Combo #C48200. You could use part #C48820. This will drop your towing capacity from 16,000 pounds using the the 2-5/16 inch ball to 10,000 pounds using the replacement 2 inch…

view full answer...

Answer 5

Hey Robert, thanks for reaching out! The best options we have to add length to your trailer tongue is with the Fulton Fold-Away Coupler Hinge which comes with Weld-On #FHDPW330300 and Bolt-On #FHDPB330301 installations. These have a 5,000 lb max…

view full answer...

Answer 6

The only trailer hitch extension available in a 60" length is the TorkLift SuperTruss Hitch Extension part #TLE1560 which then must be used with the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLC1209 for models with 6-1/2' bed…

view full answer...

Answer 7

Yes, the Dometic Part-Timer RV Toilet #DOM37FR comes with all of the mounting hardware including the lower seal (gasket) and bone tan caps.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Valerie, Jayco used both the Lippert Rhino and the 1621 across the North Point line depending on floorplan and production runs. I believe you likely have the 1621 pattern. The only way to know for sure is to check the sticker on the pin box itself.…

view full answer...

Could Replacement 2" Ball with Nut For Pintle Hitch # 337RB102000 be Used on Ball Mount

Product Page this Question was Asked From

Continue Researching