Furrion RV Observation Camera System Will Not Power On

Updated 06/17/2019 | Published 06/14/2019

Question:

Our Furrion Session Backup camera will not stay on. It comes on and goes out while driving down the road. we were always plugging and unplugging it in the cigarette lighter just to have it come on, let alone stay on. Now, it wont even power on?...Help

asked by: Kenneth M

Expert Reply:

If you are referring to the Furrion RV (Vision S) Observation Camera System like part # FOS43TASF there would appear to be an issue with the power supply. If you take a look at page 22 of the owner's manual for this system, there are steps listed which I have also attached for you below that give advice on what to do when the camera/monitor are not working correctly.

If there is no power to the monitor then complete the following:

1) Check the power cable is connected.
2) Check the cigarette lighter has 12-24V DC Output.
3) Check the fuse in the cigarette socket adapter.

If there is no power to the camera then complete the following:

1) The camera has no power connected.
2) Ensure the tow vehicle is running.
3) Ensure the 7 way connector is connected.
4) Ensure that the circuit the camera is connected to has power and is running.