Is the Ground Wire Needed for the Square LED Trailer Clearance and Side Marker Light to Work
Updated 02/06/2012 | Published 02/02/2012 >
Question:
I bought the mcl36ab clearance lights from you. I noticed there are 2 wires coming out the back. I thought they were the same type as on my other trailor but the clearance lights on it have only one wire coming out the back. Do I need to use the white ground wire on the LED lights when I install them on my 2nd trailor?
asked by: Mark M
Expert Reply:
Yes, the second wire will need to be grounded to complete the circuit for the LED Clearance Light, # MCL36AB.
If your trailer connector has a ground wire that is connected to the trailer frame at the front of the trailer, you will be able to just secure the ring terminal on the LED trailer clearance light, # MCL36AB, to the trailer frame with the light mounting bolt or a self tapping screw (not included).
If your trailer connector does not have a ground attached to the trailer frame you will need to find the common ground wire for trailer lighting and splice the wire from the clearance light into that wire.
Once you have the light properly grounded, you will need to splice the black wire into the running light circuit on your trailer.
Product Page this Question was Asked From
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Square - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Stud Mount
- Non-Submersible Lights
- LED Light
- 2-7/8L x 2-1/8W Inch
- Amber
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Will Curt 7-Way Trailer Adapter Fix Lamp Out Message on 2019 Ford F-250
- Q&A: Can the etrailer Electric Trailer Jack Be Rotated for Tailgate Clearance?
- Q&A: What are Mounting Hole Bracket Dimensions of etrailer jack part # e35YV
- Q&A: Can etrailer Electric Trailer Jack Replace Manual A-Frame Jack On Utility Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Availability Of Gunmetal Grey 14" Liger Wheel And Does It Come As A Combo With A Tire Mounted?
- Q&A: Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride


