Replacement Landing Gear for 2005 Americamp 5th Wheel

Updated 05/15/2019 | Published 05/13/2019

Products Featured in This Question

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

(766)

$283.43

Replacement Switch for Stromberg Carlson Electric Landing Gear

(68)

$79.77

Question:

Will these fit a 2005 Americamp 5th wheel I dont see where mine is welded anywhere just 2 square clamps on each leg

asked by: Timmy W

Expert Reply:

Since your 5th wheel already has landing gear mounting clamps in place you'll just want to check the spacing of the clamps to confirm the fit of Landing Gear Set # RVLG-8HDL. This 8K landing gear set has weld stops (that mate with the clamps) and these are spaced apart by 15-1/2-inches on their inside edges and by 17-1/2-inches on their outside edges. This is shown in the linked photo. The spacing between the two legs is adjustable and can range from 44-1/2-inches to 72-inches.

If you ever want to add a motor to power the landing gear we offer a Motor Kit # M1230 and switch # LG-145236 which bolts on to the gear box and requires a 12V power source capable of delivering 30-amps current.

expert reply by: Adam R