What is the Thread Pattern and Size of Replacement Square Head Bolt for Thule Fairings

Question

Question:

Can you tell me if the threads on these bolts match an M6 metric nut? I dont have a Thule rack but one similar. Thanks,

asked by: Ryan N

0

Expert Reply:

Yes, the threads on the Replacement Square Head Bolt for Thule Fairings, # 853-208909, is an M6 bolt. I pulled the bolt and another M6 item, wing nut # 753-0783, and tested them together. The bolt threaded in the nut correctly so it is an M6 bolt.

I cannot guarantee that the bolt will work with anything other than a Thule product. The bolt head is about 3/4 inches square and the head is 1/8 inch thick. Overall, the length of the bolt is about 1-1/8 inches.

expert reply by: Michael H

0

Answer 1

Yes, the Replacement M8 T-Bolt part #853-5715 will fit properly within the channels on the Thule Evo WingBar Crossbars. If you are looking for the correct Thule Evo WingBar System to use on your 2019 Kia Niro then you will need to obtain either part…

view full answer...

Answer 2

The Replacement M6 x 20 T-Bolt for Thule Trail XT Cargo Baskets part #TH36JV is 20mm or 7/16" long.

view full answer...

Answer 3

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 4

The SeaSucker Monkey Bars Roof Rack #298-SX6000B are compatible with the Thule Portage Canoe Carrier #TH819 because the Portage works with round bars. When it comes to the SeaSucker technology, you will not have an issue with temperature changes as…

view full answer...

Answer 5

The part you need is the Replacement M6 20 mm x 20 mm x 3.5 mm Square Carac Nut for Rhino-Rack Accessories - Qty 10, part #RR29TB. I have included a product description link below.

view full answer...

Answer 6

Hey Nora, so the correct replacement square nut for a Thule Hullavator part #TH898 is the part #853-7557 so that would be what you would want.

view full answer...

Answer 7

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 8

I went out to the warehouse and pulled the #853-0782 that you have referenced. The head is 0.7 inches square and 0.19 inches tall. The overall length is 2.21 inches, the threaded part makes up 2 inches of that. It has a diameter of 0.31 inches (8…

view full answer...

Answer 9

Thanks for all the pictures and the measurements! I took a look at what we have, and the closest items I was able to find to what you're needing is: -The Replacement Square T-Bolt for Thule Xadapt12 Watersports Adapter Kit #853208914, & -The…

view full answer...

Answer 10

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 11

I pulled a Replacement Square Nut #853-7557 from our warehouse and found that its dimensions were .79 by .79 of an inch and .17 of an inch thick. Check out the video I took that shows these dimensions.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Thread Pattern and Size of Replacement Square Head Bolt for Thule Fairings

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching