Selecting Weight Distribution System 2015 Jayco 26RKS Travel Trailer

Updated 05/06/2019 | Published 05/03/2019

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW

(840)

$825.00

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(279)

$19.92

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW

(840)

$850.00

Question:

Hi, My trailer is a 2015 Jayco 26RKS. I did not see this on your list. Does this mean it will not work with my trailer? I am new to this rv life. Thank you.

asked by: Brenda J

Expert Reply:

Weight distribution/sway control systems like the Equal-i-zer 4-Point # EQ37100ET are not specific to a brand or model of trailer but selecting the right one is important for getting the most benefits they can provide in your towing setup. If you like you can click on the linked video which explains lots about WD systems.

The key is knowing your fully-loaded trailer's actual tongue weight (TW) since that is what matters most. The ideal situation is that your total TW (which includes the weight of cargo behind the rear axle of the tow vehicle) falls in the middle of the system's operating range.

You can use scale # e99044 to measure the loaded trailer (with your water and propane tanks full, supplies loaded, etc) or we can select based on your trailer's specs. Your 2015 Jayco 26RKS has a dry (unloaded) hitch weight of 705-lbs so once you've got your tanks filled and your supplies in place, you're going to be close to 1000-lbs TW. This means that the particular Equal-i-zer system you referenced, part # EQ37100ET, is too light since it tops out at 1000-lbs. You will be much better off using their similar system # EQ37120ET which works for TW from 800 to 1200-lbs. This is a complete system that includes a 2-5/16-inch hitch ball; all you might add is a thin-wall socket like # ALL643216 for installing the ball.

expert reply by: Adam R