How To Tow with the Tailgate Down on a 2018 Ram 2500

Updated 05/01/2019 | Published 04/30/2019

Products Featured in This Question

Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long

(72)

$292.62

Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW

(843)

$825.00

Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW

(498)

$175.42

TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"

$1125.29

TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long

(346)

$675.17

Replacement 2-1/2" to 2" Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches

(9)

$55.23

Question:

HI, I have a 2018 Ram 2500 with the 6.4 Hemi engine. I would like to leave the tailgate down in order to haul my Harley about 900 lbs. I have a 26ft travel trailer with a load leveler. Is this possible and what do I need to purchase to make this happen? Thank you in advance for the help

asked by: Colby W

Expert Reply:

I do have options for you but the traditional hitch extenders like the Hitch Box Extension and Reducer part # RP45292 that you are looking at will reduce your towing capacity too much to be used with your trailer most likely. Therefore, the best option I have is a weight distribution system with an extended shank, the Equal-i-zer Weight Dist Shank part # EQ90-02-4600 and the Equal-i-zer Weight Distribution System part # EQ37121ET.

I understand you may not need weight distribution but the four point sway control will be a nice added bounce. If you already have a system then you can just swap out the shank as most are cross compatible. The only other option I have for you is to use the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1109-30 with a TorkLift SuperTruss Hitch Extension like part # TLE1521 and one of the Replacement 2-1/2" to 2" Adapter Sleeve part # TLM9006.