Trailer Brake Controller and Weight Distribution System for 2018 Chrysler Pacifica and Pop-Up Camper
Updated 05/01/2019 | Published 04/30/2019 >
Products Featured in This Question
Question:
do I need brakes on my pop up I have purchased my first pop up .. I took it straight from the sellers to the dealership for weight distribution hitch and electric brakes .. I have a 2018 Pacifica touring with tow package.. weight limit is 3600. Dealer tried to talk me out of the brakes. the pop up weights less than 2k lbs. I am having the brakes installed. In your opinion, should I have transmission cooler and lifts added? Thanks for you knowledge and time
asked by: Brenda
Helpful Expert Reply:
It is not required to have brakes on a 2,000 lb trailer, but it is also not a bad idea especially because your Pacifica isn't much larger.
With the tow package, you already have the factory 7-way so I recommend the Curt Echo Wireless Brake Controller # C51180 which uses a mobile app and won't add wiring in your Pacifica. However, if you prefer the physical adjustment and manual override then I recommend the Redarc Tow Pro Elite # RED44FR. This brake controller offers a very clean factory look but will required the Custom Wiring Adapter for Trailer Brake Controllers - Pigtail # RED77FR to connect with the factory harness under your dash.
For your transmission cooler, there isn't a specific need for an additional cooler with your vehicle when towing that trailer but if you want to add one I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503. This will help extend the life of your transmission and measures 11" wide x 8-3/4" tall x 7/8" deep.
For a weight distribution system, the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET is a great option for both sway control and to reduce vehicle sag. My favorite system for sway control is the Reese Strait-Line Weight Distribution System w Sway Control # RP66083. The dual cams allow more alignment and sway prevention than other models but it also requires the additional brackets. I think it is worth it, but many still prefer the Equal-I-zer brand and single brackets. The Equal-I-zer comes with the hitch ball but you will need socket # ALL643216, where the Reese system will require hitch ball # A-90 for a 2 inch diameter ball or # A-6 for a 2-5/16 inch ball whichever matches your trailer coupler.
We don't have any specific suspension enhancements for your vehicle, so I recommend simply using a weight distribution system like you stated wanting to reduce sag at the rear of your vehicle.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media








Continue Researching
- Q&A: Can Lippert ABS 12" Brakes And Hubs Be Used On Equipment Hauler Trailer With Standard 12" Brakes 7K?
- Article: Trailer Wiring Diagrams
- Q&A: Need Brake Assembly, Hubs, Bearings And Axle Nut For Dexter 3,500 lb Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Q&A: Initial Adjustment Of Self-Adjusting Electric Brakes On Trailer
- Q&A: Replacement Hub for a BD-545-17 Hub
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is the Difference Between Self-Adjust and Nev-R-Adjust
- Q&A: Do You Have Brakes and Hubs for My AL-KO 90-12 Hub for My 4,400 Pound Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

