Tow Mirror Recommendation for 2016 Ram 1500 that Allows Puddle Lights and Turns Signals to Work

Question

Question:

My 2016 RAM stock mirrors have puddle lights under and turn signal indicators upper outside. It looks like the puddle lights will still be visible but does the CM11400 slip on cover up the turn signal indicator lights on both mirrors?

asked by: Kip

0

Expert Reply:

We have one mirror as a confirmed fit for your 2016 Ram 1500 that allows the puddle lights and the turn signals of the mirror to be still usable. For that you'd want the Longview part # LVT-3100C. I attached a picture that shows you can still see the blinkers with them installed.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Longview Tow Mirrors part #LVT-3100C are the best option for your 2015 Ram 1500 that has built in turn signals as it mostly leaves them uncovered. You can see what I mean in the attached picture.

view full answer...

Answer 2

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 3

Hi Danny! The Draw-Tite #76288 and Curt #C85VV hitches for your 2022 BMW X5 are going to be pretty similar to each other. There are a few differences though, and I have those listed below: Draw-Tite #76288 Towing Capacity: 7,200 lbs Tongue Weight…

view full answer...

Answer 4

Thanks for the picture Gladys! To add a set of towing mirrors to your 2019 Ram 1500 Classic Warlock, I recommend the CIPA item #CM11400. These mirrors are custom fit and will slide right over your factory ones to extend your line of sight while…

view full answer...

Answer 5

If you want to keep the chrome mirrors on your 2018 Ram 1500 Laramie then I recommend using the Longview Custom Towing Mirrors #LVT-3100C which are the only slip-on mirrors that are compatible with the chrome mirrors. I have attached a photo that a…

view full answer...

Answer 6

Hey Dewain, we actually have a lock set specifically designed for use with the Bulletproof adjustable ball mount part #BPH77MR with the part #34061674-D. This comes with two locks for the platform of the ball mount and an additional lock for the…

view full answer...

Answer 7

Not all trailer axles have the EZ lube zerk fitting so what you have is totally normal. You can use a Bearing Buddy like you mentioned but we have found is that the Bearing Buddies make it too easy to add too much grease which then blows out the…

view full answer...

Answer 8

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

view full answer...

Answer 9

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 10

Either one of the CIPA #CM11550 or Longview #LVT-2300-C towing mirrors will work well for you. As you pointed out, the CIPA mirror will allow more of the mirror's turn signal to be visible. CIPA makes very high quality mirrors and even though we…

view full answer...

Tow Mirror Recommendation for 2016 Ram 1500 that Allows Puddle Lights and Turns Signals to Work

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching