Installing 7-Way Trailer Connector on 2014 Ford E-350 Van
Updated 04/03/2024 | Published 04/21/2019 >
Products Featured in This Question
Question:
I have a 2014 e350 super duty Ford van with a Stahl body . I would like to install trailer light 7 pin connector on the truck. There are 2 plug in connectors just behind the gas tank. The name on the connectors is EWH Speectrum part ID 207823. One connector has yellow , green , white, brown. The other has blue, orange, black. I would like to plug into these since it is all set up already.
asked by: Richard K
Helpful Expert Reply:
The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118551 which will connect to your factory wiring behind each tail light. Then you will use kit # ETBC7 to give you the wire, connectors, adapter, and circuit breakers needed.
Then you can simply install a brake controller. I recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because of its function and the clean look it provides.

Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Article: Brake Controller Installation on a Ford Full-Size Van
- Shop: Tekonsha Voyager Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Search Results: rm~751449
- Video: Review of the Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
- Video: Set up: Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center on a 2009 Ford Van
- Shop: Vehicle Tow Bar Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
- Video: 2014 Ford Van Universal Installation Kit for Trailer Brake Controller: Complete Installation
- Q&A: Brake Controller and Wiring Harness for 2014 Ford E-250 Van Not Pre-Wired For Trailer
- Shop: Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
- Shop: Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: redarc liberty
- Search Results: wilco
- Search Results: redarc mount
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Installing a Brake Controller on a 2014 Ford E-350 Van
- Video: Curt Venturer NEXT Trailer Brake Controller w/ Custom Harness Feature Review
- Video: Curt Echo Under-Dash Trailer Brake Controller Installation - 2018 Chevrolet Silverado 1500
- Shop: Front Mount Hitch
- Video: Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2014 Ford Van
- Video: Trailer Wiring Harness Installation - 2006 Ford E-350 Van
- Q&A: Wire Diagram for Installing a Voyager Brake Controller on a 2002 Ford F-250
- Q&A: Can a 24 Volt Vehicle Install a 12 Volt Brake Controller
John
4/3/2024
So to elaborate on the OP request. These 2 connectors are for a 7 pin harness. The connectors are c494 and c4000. On C494 orange is battery charge 12v, grey-brown is reverse lights, blue is the trailer brake. On C4000 Yellow is left turn, Green is right turn, Brown is parking/ running lights and White is ground. Is there really not a harness that plugs easily into these connectors? I'm having the hardest time finding it.