Installation Torque Values/Specs for Draw-Tite Trailer Hitch # 75282  

For your 2022 Hyundai Tucson I recommend the etrailer Trailer Hitch Receiver #e38KR. This receiver is made in the USA and has a matte black powder coat finish that blends well with the factory trim. It is rated for a maximum tongue weight capacity of…

From what little I was able to learn about the VelociRAX 5 bike rack on their website, the rack is compatible with a 2 inch hitch that has a tongue weight capacity of at least 500 lbs, and the Draw-Tite #75270 Class III hitch meets both those…

Yes, if you install the Stromberg Carlson trailer hitch #SC45MR by welding it you'd have a 3,500 lb towing capacity which be more than enough to tow a 3,000 lb trailer.

Yes, the Draw Tite hitch part #75282 is a confirmed fit for your 2009 Nissan Frontier and will work just fine with a full sized spare like what you see in the picture I attached.

When installing the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13364 you will use the 3 socket sizes, but the bolts are the 10 and 12mm bolts you referenced the torque values for. I reached out to my tech contact at Curt and the…

According to my contact at Tekonsha, the connector you're looking for will only be present if the bumper sensors are dealer-installed. If the parking sensors were factory installed, the connector will NOT be present, and the blue wire in question…

The Torque Specification is found in the installation instructions on our product page on the etrailer #e98846 receiver hitch. A Torque Wrench #PT87ZR would be the type that you would need to achieve that rating.

The price difference is pretty staggering between the EcoHitch part #306-X7345 and the etrailer part #e98848 and considering there really isn't a big advantage one has over the other the choice seems to be pretty easy to go with the etrailer…

I'll start with the EcoHitch Invisi Trailer Hitch Receiver #306-X7381. The price on any EcoHitch comes from the material used in the construction of the hitch. It uses a special alloy made of recycled materials and combines aluminum, steel, and…

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

You are definitely headed in the right direction! When looking into purchasing a Weight Distribution (WD) system you want to find one with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. The…