How to Add Electric Brakes to a 2001 Starcraft M-2101
Published 04/13/2019
Products Featured in This Question
Question:
Hi guys, Im trying to add electric trailer brakes to my 2001 Starcraft 2101 pop up camper. Heres what I know: Hub 5spoke pattern with 4.5inch tires are 13x4.5 spindle #84 Bearings are L44649 and L68149 Ive figured that Item # BK2-100 is the right bearing kit. Dexter trailer has 4-bolt mounting flange holes are 2 7/8inch on center Axle is 2800 max weight rating Ive been reading through all the QandA and looking at parts, but I think Ill order something wrong. Can you steer me right on the full kit? Also, wiring adapter for trailer side vehicle is already set with 7-pin adapter and trailer brake. Thanks much!!
asked by: Marcus B
Expert Reply:
I have exactly what you need to add electric brakes to your 2001 Starcraft M-2101 and have attached a list of these parts for you below:
Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K (2)
Electric Trailer Brake Kit part # AKEBRK-35-SA (Self-Adjust) or part # AKEBRK-35 (Manual Adjust)
Trailer Wiring 7-Way Upgrade Kit part # HS381-9000
Hopkins Engager Push-To-Test Trailer Breakaway Kit part # 20099
Tekonsha Primus IQ Trailer Brake Controller part # TK90160
In regards to self-adjust vs. manual adjust, the self-adjust brakes will automatically adjust for even pad wear whereas the manual adjust brakes will need to be adjusted every season by hand. I have attached a list of install and review videos on all of the above parts for you as well.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement for Lippert 126003 Hub and Drum Assembly
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)